Things I've helped build
Projects
These are some of the things I've helped build. Almost all of them were team efforts. Robots first, because they're my favourite. I like to joke with my colleagues that we're robot addicts. I know I am.

2010–2011
Electric 8x8 unmanned ground vehicle
A new eight-wheeled, multi-mission unmanned ground vehicle with electric motors and a LiFePO4 battery pack, built on a Centaur chassis from Ontario Drive and Gear. As a subcontractor to an overseas client, I managed the project, designed the electrical systems, handled key procurement and led the build on location; the two AC motors were spinning two weeks after I arrived. The client finished it as an amphibious UGV that can be tele-operated, driven up close or run autonomously, and went on to build several payload variants on the same platform.

2004–2008
Autonomous robotic system ("the grunt")
An autonomous perimeter-security UGV at Frontline Robotics, affectionately called the "grunt." The second generation was built on a heavily modified Argo Conquest ATV with custom motion control, sensors, rugged computing, a custom battery and charging system, and a remote e-stop for safe testing. There were plenty of "never been dones" along the way, including some plywood prototyping, and the demos turned out great. It was the most complex and interesting program I'd worked on up to then.

2004–2008
TriDAR project
Together with Frontline Robotics, Neptec Design Group, Xiphos and the Canadian Space Agency, we tested the TriDAR sensor tracking an object from a moving robot. We built a custom mount with vibration isolation, wireless data capture and clean power, plus software to compare its data against the robot's laser scanner. TriDAR performed exceptionally well, even on a snowy winter day, and for once Murphy's law took a holiday. The same sensor later flew on space shuttle missions to the International Space Station.

2011
Robotic arm integration
In the winter of 2011 I worked on integrating a robotic arm onto a remotely operated Polaris Ranger MVRS for a local law enforcement organization, so the vehicle could do more while keeping people out of harm's way. I managed the project and got my hands dirty alongside Provectus Robotics Solutions and WM Robots, the makers of the Knight robots. The whole system was modelled in CAD before all the parts were in hand, and it went together on the first try with only minor tweaks. After three months of planning, design and fabrication, we delivered a fully working system 13 days ahead of schedule.

2005–2006
914 PC-BOT
The PC-BOT started life as a glue-gun concept by White Box founder Tom Burrick. My team and I redesigned it into a manufacturable product: a modular metal chassis and suspension, electronics, sensors, batteries and charging, a plastic shell, and several versions of Windows and Linux control software. It was manufactured locally at Adeptron in Ottawa. The 914 won PC Magazine's DigitalLife 2006 award for Future Technology and was used by universities, research labs and robot enthusiasts around the world.

2010–2011
Greener robots
A subcontract to an international robotics consortium delivering an autonomous perimeter-security system: several UGV prototypes and a C4i station to control them. I coordinated the project and helped design and build the vehicles, which were plug-in hybrids with a small on-board generator to extend their range, a bit like the Chevy Volt. They ran on LiFePO4 packs, which meant learning battery management systems from scratch; no fire extinguishers were needed. Provectus wrote the software, and the project wrapped up with demonstrations for clients overseas.

2011–2014
Large lithium-ion battery pack
I started out in chemistry but got hooked on electric energy and propulsion. There's something about making, storing and using energy that I find fascinating.
At X4i we developed a lithium-ion battery module with its own battery management system, designed to adapt to custom electric vehicles, marine applications, telecom backup power, off-grid storage and utility-scale installations for peak shaving and grid balancing. I led the electrical and mechanical development, and the project came in on scope, schedule and budget.

2008–2009
Energy from waste
As Director of Technical Business Development at the Elementa Group, I worked on technology strategy for turning household waste into electricity and useful by-products instead of burying or burning it. With the engineering team I tackled syngas cleanup, cogeneration and heat recovery, and I put together a partnership for commercial energy-from-waste plants in Europe.

1998–2004
Telematics
At WaveCell we built two generations of GPS-based telematics hardware and software for protecting valuable cargo in transit, plus the Neptune WEX-10 CDPD modem, which went from concept to production in six weeks. One of our M45 units came through a major car crash in Mexico with a few scratches and working electronics. The car did not.

1988–1996
DuPont Canada
Eight years at the Maitland works, first in the central laboratory and then running the site's computer systems, which earned two engineering awards of excellence. Highlights were a chromatography management system and a barcode-driven laboratory information management system.
















